Coordinates: 
46°18′34″N 6°4′37″E / 46.30944°N 6.07694°E / 46.30944; 6.07694
View of the CMS endcap through the barrel sections. The ladder to the lower right gives an impression of scale.
......(
CMS) experiment is one of two large general-purpose
particle physics detectors built on the
proton-proton Large Hadron Collider (LHC) at
CERN in
Switzerland and
France. Approximately 3,600 people from 183 scientific institutes, representing 38 countries form the CMS collaboration who built and now operate the detector.
[1] It is located in an underground cavern at
Cessy in
France, just across the border from
Geneva.
Background
Recent collider experiments such as the now-dismantled
Large Electron-Positron Collider at CERN and the (as of 2010
[update]) still running
Tevatron at
Fermilab have provided remarkable insights into, and precision tests of the
Standard Model of Particle Physics. However, a number of questions remain unanswered.
A principal concern is the lack of any direct evidence for the
Higgs Boson, the particle resulting from the
Higgs mechanism which provides an explanation for the masses of elementary particles. Other questions include uncertainties in the mathematical behaviour of the Standard Model at high energies, the lack of any particle physics explanation for
dark matter and the reasons for the
imbalance of matter and antimatter observed in the Universe.
The Large Hadron Collider and the associated experiments are designed to address a number of these questions.
Physics goals
The main goals of the experiment are:
The
ATLAS experiment, at the other side of the LHC ring is designed with similar goals in mind, and the two experiments are designed to complement each other both to extend reach and to provide corroboration of findings.
Detector summary
CMS is designed as a general-purpose detector, capable of studying many aspects of
proton collisions at 14
TeV, the
center-of-mass energy of the
LHC particle accelerator. It contains subsystems which are designed to measure the
energy and
momentum of
photons,
electrons,
muons, and other products of the collisions. The innermost layer is a silicon-based tracker. Surrounding it is a
scintillating crystal electromagnetic
calorimeter, which is itself surrounded with a sampling calorimeter for hadrons. The tracker and the calorimetry are compact enough to fit inside the CMS
solenoid which generates a powerful magnetic field of 3.8
T. Outside the magnet are the large muon detectors, which are inside the return yoke of the magnet.
The set up of the CMS. In the middle, under the so-called barrel there is a man for scale. (HCAL=hadron calorimeter, ECAL=electromagnetic calorimeter)
CMS by layers
A slice of the CMS detector.
For full technical details about the CMS detector, please see the
Technical Design Report.
The interaction point
This is the point in the centre of the detector at which
proton-proton collisions occur between the two counter-rotating beams of the
LHC. At each end of the detector magnets focus the beams into the interaction point. At collision each beam has a radius of 17 μm and the crossing angle between the beams is 285 μrad.
At full design
luminosity each of the two LHC beams will contain 2,808 bunches of
1.15×1011 protons. The interval between crossings is 25 ns, although the number of collisions per second is only 31.6 million due to gaps in the beam as injector magnets are activated and deactivated.
At full luminosity each collision will produce an average of 20 proton-proton interactions. The collisions occur at a centre of mass energy of 14 TeV. It is worth noting that the actual interactions occur between quarks rather than protons, and so the actual energy involved in each collision will be lower, as determined by the
parton distribution functions.
The first which ran in September 2008 was expected to operate at a lower collision energy of 10 TeV but this was prevented by the 19 September 2008 shutdown. When at this target level, the LHC will have a significantly reduced luminosity, due to both fewer proton bunches in each beam and fewer protons per bunch. The reduced bunch frequency does allow the crossing angle to be reduced to zero however, as bunches are far enough spaced to prevent secondary collisions in the experimental beampipe.
Layer 1 – The tracker
The silicon strip tracker of CMS.
Immediately around the interaction point the inner tracker serves to identify the tracks of individual particles and match them to the vertices from which they originated. The curvature of charged particle tracks in the magnetic field allows their charge and momentum to be measured.
The CMS silicon tracker consists of 13 layers in the central region and 14 layers in the endcaps. The innermost three layers (up to 11 cm radius) consist of 100×150 μm pixels, 66 million in total.
The next four layers (up to 55 cm radius) consist of
10 cm × 180 μm silicon strips, followed by the remaining six layers of
25 cm × 180 μm strips, out to a radius of 1.1 m. There are 9.6 million strip channels in total.
During full luminosity collisions the occupancy of the pixel layers per event is expected to be 0.1%, and 1–2% in the strip layers. The expected
SLHC upgrade will increase the number of interactions to the point where over-occupancy may significantly reduce trackfinding effectiveness.
This part of the detector is the world's largest silicon detector. It has 205 m
2 of silicon sensors (approximately the area of a tennis court) comprising 76 million channels.
[2]
Layer 2 – The Electromagnetic Calorimeter
The Electromagnetic Calorimeter (ECAL) is designed to measure with high accuracy the energies of
electrons and
photons.
The ECAL is constructed from crystals of
lead tungstate, PbWO
4. This is an extremely dense but optically clear material, ideal for stopping high energy particles. It has a
radiation length of χ
0 = 0.89 cm, and has a rapid light yield, with 80% of light yield within one crossing time (25 ns). This is balanced however by a relatively low light yield of 30 photons per MeV of incident energy.
The crystals used have a front size of 22 mm × 22 mm and a depth of 230 mm. They are set in a matrix of carbon fibre to keep them optically isolated, and backed by silicon
avalanche photodiodes for readout. The barrel region consists of 61,200 crystals, with a further 7,324 in each of the endcaps.
At the endcaps the ECAL inner surface is covered by the preshower subdetector, consisting of two layers of
lead interleaved with two layers of silicon strip detectors. Its purpose is to aid in pion-photon discrimination.
Preparing lead tungstate crystals for the ECAL |
Layer 3 – The Hadronic Calorimeter
Half of the Hadron Calorimeter
The purpose of the Hadronic Calorimeter (HCAL) is both to measure the energy of individual
hadrons produced in each event, and to be as near to hermetic around the interaction region as possible to allow events with missing energy to be identified.
The HCAL consists of layers of dense material (
brass or
steel) interleaved with tiles of plastic
scintillators, read out via wavelength-shifting fibres by
hybrid photodiodes. This combination was determined to allow the maximum amount of absorbing material inside of the magnet coil.
The high
pseudorapidity region
(3.0 < | η | < 5.0) is instrumented by the Hadronic Forward detector. Located 11 m either side of the interaction point, this uses a slightly different technology of steel absorbers and quartz fibres for readout, designed to allow better separation of particles in the congested forward region.
The brass used in the endcaps of the HCAL used to be Russian artillery shells.
[3]
Layer 4 – The magnet
Like most particle physics detectors, CMS has a large
solenoid magnet. This allows the charge/mass ratio of particles to be determined from the curved track that they follow in the magnetic field. It is 13 m long and 6 m in diameter, and its refrigerated superconducting niobium-titanium coils were originally intended to produce a 4
T magnetic field. It was recently announced that the magnet will run at 3.8 T instead of the full design strength in order to maximize longevity.
[4]
The inductance of the magnet is 14
Η and the nominal current for 4
T is 19,500
A, giving a total stored energy of 2.66
GJ, equivalent to about half-a-tonne of
TNT. There are dump circuits to safely dissipate this energy should the magnet
quench. The circuit resistance (essentially just the cables from the power converter to the
cryostat) has a value of 0.1 mΩ which leads to a circuit time constant of nearly 39 hours. This is the longest time constant of any circuit at CERN. The operating current for 3.8
T is 18,160
A, giving a stored energy of 2.3
GJ.
Layer 5 – The muon detectors and return yoke
To identify
muons and measure their momenta, CMS uses three types of detector:
drift tubes (DT),
cathode strip chambers (CSC) and
resistive plate chambers (RPC). The DTs are used for precise trajectory measurements in the central
barrel region, while the CSCs are used in the
end caps. The RPCs provide a fast signal when a muon passes through the muon detector, and are installed in both the barrel and the end caps.
The Hadron Calorimeter Barrel (in the foreground, on the yellow frame) waits to be inserted into the superconducting magnet (the silver cylinder in the centre of the red magnet yoke). | A part of the Magnet Yoke, with drift tubes and resistive-plate chambers in the barrel region. |
Collecting and collating the data
Pattern recognition
Testing the data read-out electronics for the tracker.
New particles discovered in CMS will be typically
unstable and rapidly transform into a cascade of lighter, more stable and better understood particles. Particles travelling through CMS leave behind characteristic patterns, or ‘signatures’, in the different layers, allowing them to be identified. The presence (or not) of any new particles can then be inferred.
Trigger system
To have a good chance of producing a rare particle, such as a
Higgs boson, a very large number of collisions are required. Most collision events in the detector are "soft" and do not produce interesting effects. The amount of raw data from each crossing is approximately 1 MB, which at the 40 MHz crossing rate would result in 40 TB of data a second, an amount that the experiment cannot hope to store or even process properly. The trigger system reduces the rate of interesting events down to a manageable 100 per second.
To accomplish this, a series of "trigger" stages are employed. All the data from each crossing is held in buffers within the detector while a small amount of key information is used to perform a fast, approximate calculation to identify features of interest such as high energy jets, muons or missing energy. This "Level 1" calculation is completed in around 1 µs, and event rate is reduced by a factor of about thousand down to 50 kHz. All these calculations are done on fast, custom hardware using reprogrammable
FPGAs.
If an event is passed by the Level 1 trigger all the data still buffered in the detector is sent over
fibre-optic links to the "High Level" trigger, which is software (mainly written in
C++) running on ordinary computer servers. The lower event rate in the High Level trigger allows time for much more detailed analysis of the event to be done than in the Level 1 trigger. The High Level trigger reduces the event rate by a further factor of about a thousand down to around 100 events per second. These are then stored on tape for future analysis.
Data analysis
Data that has passed the triggering stages and been stored on tape is duplicated using the
Grid to additional sites around the world for easier access and redundancy. Physicists are then able to use the Grid to access and run their analyses on the data.
Some possible analyses might be:
- Looking at events with large amounts of apparently missing energy, which implies the presence of particles that have passed through the detector without leaving a signature, such as neutrinos.
- Looking at the kinematics of pairs of particles produced by the decay of a parent, such as the Z boson decaying to a pair of electrons or the Higgs boson decaying to a pair of tau leptons or photons, to determine the properties and mass of the parent.
- Looking at jets of particles to study the way the quarks in the collided protons have interacted.
Milestones
| 1998 | Construction of surface buildings for CMS begins. |
| 2000 | LEP shut down, construction of cavern begins. |
| 2004 | Cavern completed. |
| 10 September 2008 | First beam in CMS. |
| 23 November 2009 | First collisions in CMS. |
| 30 March 2010 | First 7 TeV collisions in CMS. |
The insertion of the vacuum tank, June 2002 |
 |
| Add cYE+1, a component of CMS weighing 1,270 tonnes, finishes its 100 m descent into the CMS cavern, January 2007aption |
 YE+2 descent into the cavern | | Computer-generated event display of protons hitting a tungsten block just upstream of CMS on the first beam day, September 2008 |
See also
References
- ^ [1]
- ^ CMS installs the world's largest silicon detector, CERN Courier, Feb 15, 2008
- ^ CMS HCAL history - CERN
- ^ http://iopscience.iop.org/1748-0221/5/03/T03021/pdf/1748-0221_5_03_T03021.pdf Precise mapping of the magnetic field in the CMS barrel yoke using cosmic rays
External links
b states: the leftmost peak is the 
(1S), while the lower (brown) curve shows the spectrum for decays to 
Alex Buche
Robert Myers-Perimeter Institute
Aninda Sinha-Perimeter Institute
